GAS INSTRUCTIONS
mDANGER
Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. Sparks or open flames will result in a fire or explosion, which can cause searious bodily injury or death and damage to property.
A) Mix soap and water.
B)Turn on the cylinder valve by turning cylinder valve handwheel
C)Check for leaks by wetting the fitting with the soap and water solution and watching for bubbles. If bubbles form, or if a bubble grows, there is a leak.
m WARNING: If there is a leak, turn off the gas and tighten the fitting. Turn the gas back on and recheck with the soap and water solution. If leak does not stop, Contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®. Do not use the barbecue.
D) When leak checking is complete, turn gas supply OFF at the source and rinse connections with water.
m WARNING: Do not ignite burners when leak checking.
Check:
E)
F)
G)
mWARNING: If there is a leak at connection (1, 2, or 3) turn
OFF the gas. DO NOT OPERATE THE GRILL. Contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
Check:
H)
I)
m WARNING: If there is a leak at connection (4, or 5), remove propane cylinder. Do not operate grill. Use a different propane cylinder and recheck for leaks with soap and water solution. If a leak persists after retightening the propane cylinder, turn OFF the gas. DO NOT OPERATE THE GRILL. Contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.
Note: Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks. ◆
www.weber.com® 25
