Weber 300 manual Handle Light Troubleshooting Q320, Maintenance, Cleaning

Models: 300

1 72
Download 72 pages 54.79 Kb
Page 32
Image 32

HANDLE LIGHT TROUBLESHOOTING (Q320)

PROBLEM

CHECK

SOLUTION

 

 

 

Weber Q Grill OutHandle

Are the batteries old?

Replace batteries.

Light does not light.

 

 

Are the batteries installed correctly?

Refer to assembly illustration.

 

 

 

 

 

Is the lid in the up position with the power button ON?

Light will activate when lid is open.

 

 

 

 

Is the Weber Grill OutHandle Light activated?

Press the power button.

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

To replace batteries, remove lightpod by removing screw (1). Push tab (2) and pull apart.

2

1

MAINTENANCE

CLEANING

mWARNING: Turn your Weber® gas barbecue OFF and wait for it to cool before cleaning.

For availability of replacement cooking grates contact the Customer Service

Representative in your region using the contact information on our web site.

Log onto www.weber.com®.

Outside surfaces - Use a warm soapy water solution to clean, then rinse with water.

mCAUTION: Do not use oven cleaner, abrasive cleansers (kitchen cleansers), cleaners that contain citrus products, or abrasive cleaning pads on barbecue or cart surfaces.

Cooking grates - Clean with a suitable brass bristle brush. As needed, remove from grill and wash with warm soapy water, then rinse with water.

Catch pan - Disposable foil trays are available, or you can line the catch pan with aluminum foil. To clean the catch pan, wash with warm soapy water, then rinse.

Inside cookbox - Brush any debris off of burner tubes. DO NOT ENLARGE BURNER PORTS (OPENINGS). Wash inside of cookbox with warm soapy water and a water rinse.

Inside lid - While lid is warm, wipe inside with paper towel to prevent grease build-up. Flaking built-up grease resembles paint flakes.

Swing-up work tables - Wash with a soft cloth and a soap and water solution.

Do not use cleaners that contain acid, mineral spirits or xylene. Rinse well after cleaning.

Swing-up work tables are not to be used as cutting boards.

32

Page 32
Image 32
Weber 300 manual Handle Light Troubleshooting Q320, Maintenance, Cleaning