Weber 300 manual Annual Maintenance, Inspection And Cleaning Of The Spider/Insect Screen

MAINTENANCE

ANNUAL MAINTENANCE

Inspection And Cleaning Of The Spider/Insect Screen

If there is dust or dirt on the Spider/Insect screen, remove the burner to clean the screen. Refer to “BURNER TUBE CLEANING OR REPLACEMENT”.

Brush the Spider/Insect screen, lightly, with a soft bristle brush (i.e. an old toothbrush).

m CAUTION: Do not clean the Spider/Insect screen with hard or sharp tools. Do not dislodge the Spider/Insect screen or enlarge the screen openings.

Lightly tap the burner to get debris and dirt out of the burner tube. Once the Spider/ Insect screen and burner is clean, replace the burner.

If the Spider/Insect screen becomes damaged or cannot be cleaned, contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

Main Burner Flame Pattern

The Weber® gas barbecue burner has been factory set for the correct air and gas mixture. The correct flame pattern is shown.

A) Burner tube (1)

B) Tips occasionally flicker yellow (2) C) Light blue (3)

D) Dark blue (4)

If the flames do not appear to be uniform throughout the burner tube, follow the burner 1

cleaning procedures. ◆

2

3

4

mATTENTION: This product has been safety tested and is only certified for use in a specific country. Refer to country designation located on outer carton.

These parts may be gas carrying or gas burning components. Please contact Weber-Stephen Products LLC, Customer Service Department for genuine Weber-Stephen Products LLC replacement part(s) information.

mWARNING: Do not attempt to make any repair to gas carrying, gas burning, igniter components or structural components without contacting Weber-Stephen Products LLC, Customer Service Department. Your actions, if you fail to follow this Product Warning, may cause a fire, an explosion, or structural failure resulting in serious personal injury or death as well as damage to property.

36