29.Wrap the Lat Cable (88) around a 3 1/2” Pulley (78). Attach the Pulley and a Long Cable Trap (102)
to the Top Frame (6) with a 3/8” x 1 3/4” Bolt (93)
and a 3/8” Nylon Jamnut (113). | Make sure the |
Cable Trap is turned to hold the Cable in the |
|
groove of the Pulley. |
|
30.Remove the preattached 3 1/2” Pulleys (78) from the Pulley Plates (63).
Wrap the Lat Cable (88) around a 3 1/2” Pulley
(78). Attach the Pulley and a Cable Trap (68) to the second set of holes from the top of the Pulley
Plates (63) with a 3/8” x 2” Bolt (100) and a 3/8”
Nylon Locknut (87). Make sure the Cable Trap is turned to hold the Cable in the groove of the
Pulley.
31.Attach the end of the Lat Cable (88) inside of the Butterfly Top Frame (7) with a 5/16” x 2 1/2” Bolt (59), two 5/16” Washers (90), and a 5/16” Nylon Locknut (86).
32.Locate the Butterfly Cable (69), which is the
shortest Cable. Attach the Cable to the Pivot Bracket (70) on the Left Butterfly Arm (25) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).
33.Wrap the Butterfly Cable (69) over a
the indicated bracket on the Butterfly Upright (3) with a 3/8” x 2 1/2” Bolt (18) and a 3/8” Nylon
Locknut (87). Make sure that the Long Cable
Trap is turned to hold the Cable in the groove of the Pulley.
14
29 |
| 88 | 78 |
| 113 | ||
|
|
| |
|
|
| 102 |
|
|
| 93 |
|
|
| 6 |
30 |
|
|
|
| 100 |
|
|
| 68 |
| 78 |
|
|
| |
|
|
| 87 |
| 88 |
|
|
| 63 |
|
|
31 | 86 | 90 |
|
|
|
| 90 |
|
|
| 59 |
| 7 |
|
|
| 88 |
|
|
32 |
|
|
|
|
| 86 |
|
|
|
| 69 |
|
|
| 103 |
|
| 70 | |
|
|
| 25 |
33 |
|
|
|
| 3 |
| |
| 87 | 55 | 102 |
|
|
| |
|
|
| 18 |
| 69 |
| |
