57. Attach the Seat (16) to the Seat Frame (8) with two
1/4” x 3/4” Screws (114), a 1/4” x 2 1/2” Screw (99), and a 1/4” Washer (97).
58. Attach the Butterfly Backrest (15) to the Butterfly Upright (3) with four 1/4” x 3/4” Screws (114).
59.Wet one end of the Squat Arm (32) with soapy water. Slide a Short Pad (20) onto the Squat Arm as shown.
Slide two Nut Clips (108) onto a Squat Handle (33). Attach the Squat Handle to the Squat Arm (32) with
two 5/16” x 3/4” Button Head Screws (51). Slide an Inner Cap w/Hole (111) onto the Squat Handle and
press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8” Handgrip (84) onto the Squat Handle.
Repeat this step with the other end of the Squat
Arm (32).
60.Attach the Squat Arm (32) to the Squat Bracket (37)
with two 3/8” x 2 1/2” Carriage Bolts (106) and two
3/8” Nylon Locknuts (87). | Do not tighten the |
Nylon Locknuts yet. |
|
Finish attaching the Squat Arm (32) to the Squat
Bracket (37) with two 3/8” x 3” Carriage Bolts (126), a Small Support Plate (127), and two 3/8” Nylon
Locknuts (87).
Tighten all of the 3/8” Nylon Locknuts (87) used in this step.
20
57 |
|
|
|
| 16 |
|
|
| 8 |
|
|
|
| 97 |
|
|
| 114 |
|
|
| 99 |
|
58 |
|
| 114 |
| 15 |
| 3 |
|
|
| 114 |
59 |
| 20 |
|
| 32 |
| |
|
|
| |
| 51 |
|
|
|
| 20 |
|
|
|
| 108 |
| 51 | 108 |
|
|
|
| |
|
|
| 33 |
|
|
| 111 |
|
| 84 |
|
60 | 87 |
|
|
| 87 | 32 |
|
| 127 |
| |
|
|
| 106 |
|
| 126 | 37 |
