7. Press a 2” x 3” Inner Cap (58) into the top of the | 7 |
| |
Squat Upright (4). Slide the Squat Upright onto the |
| ||
58 |
| ||
two indicated 5/16” x 2 1/2” Carriage Bolts (110) in |
| ||
the Long Base (120). Finger tighten a 5/16” Nylon |
|
| |
Locknut (86) onto each Carriage Bolt. | Do not tight- |
| |
en the Nylon Locknuts yet. |
| 58 | |
|
| ||
Press a 2” x 3” Inner Cap (58) into the top of the | 5 |
| |
Swivel Upright (5). Slide the Swivel Upright onto the |
|
| |
two indicated 5/16” x 2 1/2” Carriage Bolts (110) in |
| ||
the Long Base (120). Finger tighten a 5/16” Nylon |
|
| |
Locknut (86) onto each Carriage Bolt. | Do not tight- |
| |
en the Nylon Locknuts yet. | 4 |
| |
|
| ||
| 86 |
| |
| 110 | 86 | |
| 120 | ||
|
| 110 | |
8. Press two Swivel Bushings (66) into the Swivel | 8 |
| |
Carriage (46). | 66 | ||
| |||
Tighten an Adjustment Handle (65) into the Swivel |
|
| |
Carriage (46). Orient the Swivel Carriage as shown. |
|
| |
Slide the Carriage onto the Swivel Upright (5) and |
| 46 | |
engage the Adjustment Handle into an adjustment |
| ||
65 |
| ||
hole in the Swivel Upright. |
| ||
|
| ||
| 66 |
| |
| 5 |
| |
| Adjustment |
| |
| Hole |
| |
8
