Weider 831.159361 user manual Cable Assembly

CABLE ASSEMBLY

25.Attach the end of the Short Cable (58) to the Long “U”-Bracket (57) with a 1/4” Nylon Lock- nut (2) and a 1/4” Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the nut, as shown in the inset drawing.

26.Attach the 3 1/2” Low Pulley (88) and the 5/8” x 9/16” Spacer (73) to the indicated hole in the Press Frame (17) with a 3/8” x 3 3/4” Bolt (71), a 3/8” Flat Washer (9), and a 3/8” Nylon Locknut (21). Do not tighten the 3/8” Nylon

Locknut (21) yet. Be sure that the 3/8” x 3 3/4” Bolt (71), the 3/8” Flat Washer (9), the 5/8” x 9/16” Spacer (73), the 3 1/2” Low Pulley (88), and the 3/8” Nylon Locknut (21) are oriented as shown.

25

58

57

10 58

10 2

2

57

26

9 71

17

21	73
	88

12