ARM ASSEMBLY
12.Lubricate both axles on the Top Frame (55).
Slide the Right Arm (48) onto the right axle.
Note: Be careful not to confuse the Right Arm with the Left Arm (47); refer to step 11 to identify the Right Arm. Be sure that the upper end of the Right Arm is behind the indicated bracket on the Top Frame (55).
Tap two 1” Retainers (69) and a 1” Round Cover Cap (70) onto the right axle. Be sure that the teeth on the Retainers bend toward the Cover Cap, as shown in the inset drawing.
Attach the Left Arm (47) in the same manner.
Press 1 3/4” Square Inner Caps (44) into the lower ends of the Right and Left Arms (47, 48). Wet the lower end of each Arm with soapy water. Slide a 10” Pad (45) onto the lower end of each Arm.
13.Press two 1” x 2” Inner Caps (83) into the indicated end of the Squat Arm (79).
Lubricate a 3/8” x 3 1/4” Bolt (85). Attach the Squat Arm (79) to the Front Upright (42) with the 3/8” x 3 1/4” Bolt and a 3/8” Nylon Locknut (21).
Attach a Handle (92) to one side of the Squat Arm (79) with a 5/16” x 2 1/2” Bolt (22), two 5/16” Flat Washers (8), a 1/2” x 17/32” Spacer (94), and a 5/16” Nylon Locknut (3).
Attach the other Handle (92) to the other side of the Squat Arm (79) in the same manner.
12 |
47 |
Bracket |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Lubricate |
55 |
|
|
|
|
|
|
|
|
|
|
|
|
| Axle |
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6945
70
48
44 
Axle
45 | 69 |
70
13
| 8 | 22 |
| 92 | |
22 | 83 |
|
94 |
| |
83 |
| |
|
| |
8 | 8 |
|
92 | 3 |
|
94 | 8 | 21 |
| 79 | |
| 3 | |
|
| |
|
| 42 |
|
| 85 |
|
| Lubricate |
8
