Weider 831.159361 user manual Locknut. The Leg Lever must be able to pivot freely

SEAT ASSEMBLY

41.Press a 1 1/2” Square Inner Cap (32) into the Front Seat Frame (36).

Insert the 1/4” x 2 1/4” Carriage Bolt (38) into the center hole in a Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4” x 1/2” Screws (18).

Insert the 1/4” x 2 1/4” Carriage Bolt (38) into the indicated hole in the Front Seat Frame

(36).Tighten a 1/4” Nylon Locknut (2) with a 1/4” Flat Washer (10) onto the Carriage Bolt.

Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4” Flat Washer

(10)and the 1/4” x 2” Screw (24).

42.Press a 1 1/2” Square Inner Cap (32) into the Leg Lever (29).

Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16” x 2 1/4” Bolt and a 5/16” Nylon Locknut (3). Do not overtighten the Nylon

Locknut. The Leg Lever must be able to pivot freely.

Insert the 5/16” x 2” Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16” Nylon Locknut (3) with a 5/16” Flat Washer (8) onto the Eyebolt.

43.Rest the Front Seat Frame (36) on the indicat- ed pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40).

41

13

38

37

32

18

10

24 36

2

42

			36
		3
Lubricate—33		29
	35	8

3 32

43

40

36

42

14

17