SEAT ASSEMBLY
38.Press a 1 3/4” Square Inner Cap (44) into the Rear Seat Frame (77).
Insert the 1/4” x 2 1/2” Carriage Bolt (91) into the center hole in a Seat Plate (37). Attach the Seat Plate to a Seat (13) with two 1/4” x 1/2” Screws (18).
Insert the 1/4” x 2 1/2” Carriage Bolt (91) into the indicated hole in the Rear Seat Frame
(77).Tighten a 1/4” Nylon Locknut (2) with a 1/4” Flat Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Rear Seat Frame (77) with a 1/4” Flat Washer
(10)and the 1/4” x 2 1/4” Screw (82).
39.Align the holes in the Rear Seat Frame (77) with one set of holes in the Rear Upright (56). Attach the Rear Seat Frame to the Rear Upright with a 5/16” x 2 3/4” Carriage Bolt
(14)and a Seat Knob (40).
40.Attach the Large Backrest (41) to the Front Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10). The Backrest must be oriented as shown.
38
13
91
37
44 | 18 |
|
77
2 10
82
39
40
77
14 56
40 |
41 |
43 10
42
Thick End
16
