ATTACHING THE LEG LEVER TO THE LOW PUL- LEY STATION
To use the Leg Lever (29), the seat must be attached to the front upright (see ATTACHING AND REMOV- ING THE SEATS below).
Attach one end of the Chain (52) to the Long Cable
(86)with a Cable Clip (53). Attach the other end of the Chain to the Eyebolt (35) with a Cable Clip.
Always remove the Chain (52) from the Eyebolt
(35)before removing the seat.
ATTACHING AND REMOVING THE SEATS
See drawing A. Set the bracket on the Front Seat Frame (36) onto the indicated pins on the Front Upright (42). Attach the Front Seat Frame to the Front Upright with the 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40).
For some exercises, the Front Seat Frame (36) must be removed. First, be sure that the chain is not attached to the leg lever. Next, remove the Seat Knob
(40)and the 5/16” x 2 3/4” Carriage Bolt (14) from the Front Seat Frame. Lift the Front Seat Frame off the Front Upright (42).
See drawing B. Align the holes in the Rear Seat Frame (77) with one set of holes in the Rear Upright (56). Attach the Rear Seat Frame to the Rear Upright with the 5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob (40).
For some exercises, the Rear Seat Frame (77) must be removed. Remove the Seat Knob (40) and the 5/16” x 2 3/4” Carriage Bolt (14) from the Rear Seat Frame. Lift the Seat Frame off the Rear Upright (56).
53
52 |
35 29
86
A
42 40
36
14 |
B
40
77 
14 | 56 |
|
20
