CABLE ASSEMBLY
31.Wrap the Long Cable (86) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the Press Frame (17) with a 3/8” x 3 1/2” Bolt (16), a 3/8” Flat Washer (9), and a 3/8” Nylon Locknut (21). Be sure that the
Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.
32.Wrap the Long Cable (86) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the indicated hole in the Front Upright (42) with a 3/8” x 3 3/4” Bolt (71), a 3/8” Flat Washer (9), and a 3/8” Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.
33. Route the Long Cable (86) over the lower 3 1/2” Pulley (15) attached to the
34.Wrap the Long Cable (86) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on the Front Base (4) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown.
31
| 15 | 21 |
|
| |
86 |
| 66 |
| 9 |
|
16 | 17 |
|
|
|
32
42
9 21
86
15 |
66
71
33
81 |
15
86
34
86 |
| 4 |
15 | 21 |
|
12 66
14
