25.Remove both 3 1/2" Pulleys (24) from the
Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown. Attach the Pulley and a Cable
Trap (25) to the top hole in the two Adjustable Pulley Plates (23) with a 3/8" x 2" Bolt (54) and a 3/8" Nylon
Locknut (50). Make sure the Cable Trap and the Pulley Plates are oriented as shown.
26.Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown, Attach the Pulley to the Small Pulley Bracket (22) with a 3/8" x 1 3/4" Bolt (57) and a 3/8" Nylon Locknut (50). Make sure the Pulley Bracket is oriented as shown.
27.Wrap the Ab Cable (74) around a 3 1/2" Pulley (24) in the direction shown. Attach the Pulley and a Cable
Trap (25) to the welded bracket on the Butterfly Base
(4)with a 3/8" x 2" Bolt (54) and a 3/8" Nylon Locknut
(50).Make sure the Cable Trap is oriented as shown.
25
J
J
25
23
74A
26
57
t3
