3.Place the bracket on the lower end of the Butterfly Upright (1) over the indicated 5/16" x 2 1/2" Carriage Bolts (92) in the Butterfly Base (4). Hand tighten two 5/16" Nylon Locknuts (64) onto the Bolts. Do not tighten the Nylon Locknuts yet.
1
64
|
|
| 4\ |
|
|
| 92 |
4, | Press three 2" Square Inner Caps (28) into the | 4 | 8 c |
| |||
| ButterflyTop Frame (33). Press two 1"Round Inner | ||
|
| 86 | |
| Cap (86) into the top of the ButterflyTop Frame (33). |
|
3 _28
Attach the Butterfly Top Frame (33) to the indicated bracket at the top of the ButterflyUpright (1) with two
5/16" x 2 3/4" Bolts (89), a Support Plate with 3 1/2" center holes (93), and two 5/16" Nylon Locknuts(64).
84 u
5. Attach the Butterfly Seat Frame (14) to the Front Leg (20) with two 5/16" x 2 3/4" Bolts (89), two 5/16"
Washers (36), and two 5/16" Nylon Locknuts (64). Do
not tighten the Nylon Locknuts yet. |
| |
Slide the bracket on the Front Leg (20) onto the two |
| |
5/16" x 2 1/2" Carriage Bolts (92) in the ButterflyBase |
| |
(4). Hand tighten two 5/16" Nylon Locknuts (64) onto | 89 | |
the Bolts. Do not tighten the Nylon Locknute yet, | ||
| ||
Attach the ButterflySeat Frame (14) to the Butterfly |
| |
Upright (1) with two 5/16" x 2 3/4" Bolts (89), two |
| |
5/16" Washers (36) and two 5/16" Nylon Locknuts |
| |
(64). Do not tighten the Nylon Locknuts yet. |
|
6
