Assembly

Note: This introduction will save you more time than it takes to read it!

Making Things Easier for Yourself

Everything in this manual is designed to ensure that our products can be assembled successfully by anyone. However, it is important to recognize that your new equipment is a sophisticated prod- uct with many small parts. The assembly process will take timeÑpossibly several hours. Most peo- ple find that by setting aside plenty of time, and by deciding to make the task enjoyable, assembly will go smoothly. You may want to complete the process over a couple of evenings.

Identifying Parts

To help you identify the small parts used in assem- bly, we have included a PART IDENTIFICATION CHART located in the center of this manual. Place the chart on the floor or work table and use it to quickly identify different parts as you open the pack- ages for each step. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre- attached.

Orienting Parts

As you assemble this product, be sure that all parts are oriented as shown in the drawings.

Giving Yourself a Good Start

Before you begin the assembly process itself, take the time to complete the steps outlined here.

Clearing the Workspace

Clear a workspace that is large enough to hold all parts and allow you to walk all the way around the assembled equipment.

Unpacking the Box

To make the assembly process as smooth as possi- ble, we have broken it into separate stages. All parts used in each stage are found in individual packages in the shipping box. Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Important: Wait until you begin each assembly stage to open the parts bag labeled for that assembly stage.

Some assembly steps require two people.

Tightening Parts

Tighten all parts as you assemble them, unless instructed to do otherwise.

Lining Up the Tools

Assembly requires the following tools (not included):

¥ Two (2) adjustable wrenches

¥ One (1) standard screwdriver

¥ One (1) phillips screwdriver

¥ One (1) rubber mallet

¥Lubricant, such as grease or petroleum jelly, and soapy water

¥Tape, such as clear tape or masking tape

Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches or a set of ratchet wrenches.

The Four Stages of the Assembly Process

Frame Assembly

You will begin by assembling the base and the upright frames that serve as the skeleton of the equipment.

Cable Assembly

This assembly completes the cables and pulleys that connect the moving arms with each other and with the weights.

Arm Assembly

This assembly completes the press and butterfly arms that you operate while you are exercising.

Seat Assembly

This assembly completes the seat and backrest that support your body while you are exercising.

4

Page 3 Page 5
Page 4
Image 4
Weider WESY99490 manual Four Stages of the Assembly Process
Page 3 Page 5

WESY99490 specifications

The Weider WESY99490 is a prominent choice in the world of home gym equipment, expertly designed to meet the needs of fitness enthusiasts of all levels. This innovative machine stands out due to its remarkable combination of versatility and ease of use, making it a valuable addition to any home workout environment.

One of the primary features of the Weider WESY99490 is its multi-functionality. It offers a range of exercises that work for various muscle groups, allowing users to perform exercises such as bench presses, leg extensions, lat pulldowns, and many more. This versatility empowers users to follow comprehensive workout routines without the need for multiple bulky equipment pieces, saving space and increasing convenience.

Equipped with a sturdy steel frame, the WESY99490 is built for durability and stability. Users can confidently perform a wide range of exercises without worry, as the robust construction ensures that the machine can withstand rigorous workouts. Moreover, its sleek design complements any home gym aesthetic, providing an attractive yet functional fitness solution.

The Weider WESY99490 boasts advanced technology features, including a weight stack for seamless resistance adjustments. This weight stack eliminates the hassle of changing plates manually, allowing users to increase or decrease resistance quickly while maintaining workout flow. The machine typically accommodates a variety of weight settings, which can cater to both beginners and advanced lifters alike.

Another notable characteristic is the adjustable seats and backrest, which enhance comfort during workouts. Proper alignment and support are crucial for injury prevention and achieving optimal performance, and the adjustable features ensure that users can find their perfect fit.

Additionally, the Weider WESY99490 is known for its user-friendly assembly process. Many users appreciate the straightforward instructions and readily available pre-drilled holes that make setup a breeze, enabling them to begin their fitness journey with minimal delay.

In summary, the Weider WESY99490 is a comprehensive fitness machine designed for those seeking a versatile and efficient home gym solution. Its robust construction, multi-functionality, adjustable components, and convenient weight stack technology position it as a top choice for achieving fitness goals effectively and comfortably. Whether you are a novice or a seasoned athlete, this equipment is designed to support your journey toward improved health and fitness.
Top Page Image Contents