28.Wrap the Ab Cable (74) around a 3 1/2Ó Pulley (24) in the direction shown. Slide the Pulley and a Cable Trap (25) onto the 3/8Ó x 3 1/2Ó Carriage Bolt (95) already inserted into the Butterfly Base (4). Secure the Pulley with a 3/8Ó Nylon Jamnut (63). Make sure the Cable Trap is oriented as shown.
Route the threaded end of the Ab Cable (74) under the 3 1/2Ó Pulley (24) that is already mounted on the Weight Base (5). Make sure the Cable is routed in the direction shown.
Note: For clarity, this and the following drawings show some parts removed.
29.Wrap the Ab Cable (74) around a 4 1/2Ó Pulley (82) in the direction shown. Attach the Pulley inside the indi- cated bracket on the Weight Top Frame (66) with a 3/8Ó x 1 3/4Ó Bolt (57) and a 3/8Ó Nylon Locknut (50).
Make sure the threaded end of the Ab Cable is routed through the bracket, as shown.
30.Attach the threaded end of the Ab Cable (74) to a ÒUÓ- Bracket (97) with a 1/4Ó Flat Washer (71) and a 1/4Ó Nylon Locknut (68).
Attach the
28 | 63 |
|
|
| |
| 24 | 74 |
| 25 |
|
| 95 | 24 |
|
| |
4 | 5 |
|
|
| |
29 | 50 | 82 |
| ||
| Bracket |
|
|
| 57 |
| 66 |
|
| 74 |
|
End of
Cable
30
74
71
68
97
| 74 |
| 64 |
| 97 |
96 | 71 |
| |
| 68 |
17
14
