3.Place the bracket on the lower end of the Butterfly Upright (1) over the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (92) in the Butterfly Base (4). Hand tighten two 5/16Ó Nylon Locknuts (64) onto the Bolts. Do not tighten the Nylon Locknuts yet.
4.Press three 2Ó Square Inner Caps (28) into the Butterfly Top Frame (33). Press two 1Ó Round Inner Cap (86) into the top of the Butterfly Top Frame (33).
Attach the Butterfly Top Frame (33) to the indicated bracket at the top of the Butterfly Upright (1) with two 5/16Ó x 2 3/4Ó Bolts (89), a Support Plate with 3 1/2Ó center holes (93), and two 5/16Ó Nylon Locknuts (64).
5.Attach the Butterfly Seat Frame (14) to the Front Leg (20) with two 5/16Ó x 2 3/4Ó Bolts (89), two 5/16Ó Washers (36), and two 5/16Ó Nylon Locknuts (64). Do not tighten the Nylon Locknuts yet.
Slide the bracket on the Front Leg (20) onto the two 5/16Ó x 2 1/2Ó Carriage Bolts (92) in the Butterfly Base
(4). Hand tighten two 5/16Ó Nylon Locknuts (64) onto the Bolts. Do not tighten the Nylon Locknuts yet.
Attach the Butterfly Seat Frame (14) to the Butterfly Upright (1) with two 5/16Ó x 2 3/4Ó Bolts (89), two 5/16Ó Washers (36) and two 5/16Ó Nylon Locknuts (64). Do not tighten the Nylon Locknuts yet.
3 |
|
|
|
| 1 |
|
|
|
| 64 |
|
4 |
|
|
|
| 92 |
| |
4 | 89 |
| |
86 |
|
| 93 |
28 |
|
| 28 |
|
|
| |
33 |
|
|
|
64 |
|
| 28 |
| 1 |
|
|
5 | 64 | 64 | 1 |
|
|
| |
|
|
| 89 |
36 |
| 14 | 64 |
|
| 36 | |
|
|
| |
| 64 |
|
|
89 | 64 |
|
|
20 |
|
|
|
|
|
| 4 |
|
| 92 |
|
6
