Quick Start
Figure 3.1: Plug Status Screen - Web Browser Interface (Model IPS-800CE-D16 Shown)
Internet Power Switch v1.41h | Site ID: (undefined) |
|
|
|
|
| |||||
Plug Name | Password | Status Boot/Seq. Delay | Default | ||||||||
ON | 0.5 | Secs | ON | + | |||||||
1 | (undefined) | (undefined) | |||||||||
2 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
3 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
4 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
5 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
6 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
7 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
8 | (undefined) | (undefined) | ON | 0.5 | Secs | ON | |||||
| + | ||||||||||
“/H” for help. IPS>
Figure 3.2: Plug Status Screen - Text Interface (Model IPS-800CE-D16 Shown)
b)Text Interface:
i.Via Telnet: Telnet to the IPS’s default IP address (192.168.168.168). The Plug Status Screen (Figure 2) should be displayed.
ii.Via Local PC: Start your communications program (e.g., Hyperterminal) and then press [Enter]. The Plug Status Screen should be displayed as shown in Figure 2. The default communications parameters for the Console Port are 9600 bps, No Parity, 8 data bits, One stop bit.
