Confi guration
5.3.4.Network Parameters Menus
The Network Parameters Menus are used to select the IP Address and other network parameters.
•Web Browser Interface: Click the "Setup" button to access the Setup Menus, and then click the "Network Parameters" button. The Network Parameters Menu will be displayed as shown in Figure 5.9.
•Text Interface: Type /N and press [Enter]. The Network Parameters Menu will be displayed as shown in Figure 5.10.
Notes:
•Although the Web Browser Interface and Text Interface both allow configuration of the same network parameters, note that for the Text Interface, the IP Security feature is configured via a separate submenu. For more information on IP Security, please refer to Section 5.3.4.1.
•Settings for network parameters depend on the configuration of your individual network. Contact your network administrator for appropriate settings.
The Network Parameters Menus allow the following parameters to be defined. Except where noted, all parameters listed here are available via both the Web Browser Interface and Text Interface.
•IP Address: Defines the IP address for the IPS unit. (Default = 192.168.168.168.)
•Subnet Mask: Defines the Subnet Mask for the IPS unit. (Default = 255.255.255.0.)
•Gateway Address: Defines the Gateway Address for the IPS unit. (Default = undefined.)
•Send MSS: Defines the Maximum Segment Size that will be sent by the IPS. (Default = 536.)
•IP Security: Sets up the IP Security feature. Please refer to Section 5.3.4.1 for a detailed description of the IP Security feature.
•MAC Address: Displays the unit’s MAC Address. Please note that this item only displays the assigned MAC Address, and cannot be used to redefine the address. Note also that the MAC Address is not displayed via the Web Browser Interface.
