IPS-800CE-D16 & IPS-1600CE-D16 - User’s Guide
Figure 5.12: Telnet Parameters Menu - Web Browser Interface
TELNET PARAMETERS:
1. | Service: | On |
2. | Telnet Port #: | 23 |
Enter Selection,
Press <ESC> to Exit ...
Figure 5.13: Telnet Parameters Menu - Text Interface
5.3.5.The Telnet Parameters Menus
The Telnet Parameters Menus are used to enable/disable Telnet access to the IPS command mode and select the TCP port for Telnet connections.
•Web Browser Interface: Click the "Setup" button to access the configuration menus, and then click the "Telnet Parameters" button to display the menu shown in Figure 5.12.
•Text Interface: Type /T and press [Enter]. The Telnet Parameters Menu will be displayed as shown in Figure 5.13.
The Telnet Parameters Menus allow the following parameters to be defined. Please note that all parameters listed here are available via both the Web Browser Interface and Text Interface.
•Service: Enables/Disables Telnet communication with the IPS unit. When this item is "Off," user’s will not be able to contact the unit via Telnet. (Default = On.)
•Port Number: Selects the TCP/IP port number that will be used for Telnet connections. (Default = 23.)
