Confi guration
Figure 5.7: Plug Parameters Menu - Web Browser Interface
PLUG #1 PARAMETERS:
1.Plug Name:
2.Password:(undefined)
3.Boot/Seq. Delay: 0.5 Secs
4.Power Up Default: On(undefined)
Enter Selection,
Press <ESC> to Exit ...
Figure 5.8: Plug Parameters Menu - Text Interface (Plug 1 Shown)
5.3.3.Plug Parameters Menus
The Plug Parameters Menus are used to define Plug Names, Plug Passwords, boot/sequence delay times and Power Up Default values for each of the IPS’s Switched AC Outlets.
•Web Browser Interface: Click the "Setup" button to access the configuration menus, then click the "Plug Parameters" button. The Plug Parameters Menu will be displayed as shown in Figure 5.7.
•Text Interface: Type /P n and then press [Enter] (Where n is the number or name of the plug you wish to configure.) The Plug Parameters Menu will be displayed as shown in Figure 5.8.
Note that in this case, the major difference between the Web Browser Interface and Text Interface is that the Web Browser Interface allows you to select parameters for all plugs from a single menu, whereas the Text Interface includes a separate menu for each plug.
