Operation
To Switch Plugs, or initiate a Boot Cycle, proceed as follows:
1.Switch Plug(s) On: To
For example:
/ON 1 or /ON ROUTER
2.Switch Plug(s) Off: To
/OFF 2 or /OF ROUTER
3.Boot Plug(s): To initiate a Boot cycle, type /BOOT n and press [Enter]. Where "n" is a the number or name of the desired plug. Note that the "/BOOT" command can also be entered as "/BO". For example:
/BOOT 1 or /BO ATMSWTCH
4.Set Plugs to Power Up Defaults: Type /D and press [Enter]. Plugs will be set to their default On/Off status, which is defined using the Plug Parameters Menu as described in Section 5.3.3.
Notes:
•When you have accessed command mode using the System Password, the Default command will be applied to all plugs.
•When you have accessed command mode using a Plug (User) Password, the Default command will only be applied to the plugs permitted by the password.
5.Suppress Command Confirmation Prompt: To execute a Boot/On/Off command without displaying the "Sure?" prompt, include the ",Y" option at the end of the command line. For example:
