■Chapter 2 Bios Setup and Security Feature
provides both a Supervisor and a User password. If you try to activate both passwords, the Supervisor password must be set first. The passwords activate two different levels of protection:
1.System always asks for password every time it is powered on.
2.System asks for password only when you attempt to enter BIOS utility.
The passwords are encrypted and stored in NVRAM. Make sure you write them down or memorize them. If you lost the passwords, the computer may need to be sent back to the factory or to an authorized service dealer to reset the passwords.
Power Setup
|
|
|
|
Item | Selections / | Description | |
|
|
| |
LCD Panel | Enable | When Enabled (system is powered by | |
Power Saving | Disable | battery), the system will automatically | |
|
|
| adjust the LCD brightness to save |
|
|
| power. |
Long Battery | Enable | When Enabled, maximum battery life | |
Life Mode | Disable | can be achieved. The processor | |
|
|
| performance is lowered. |
|
|
|
|
|
|
|
|
Note: In Windows ME / 98SE / 2000 / XP, suspend mode and settings are determined by settings in the Power Options Properties (Start > Control Panel > Power Options).
