Westinghouse VK-40F580D Channel Management, Reset Picture and Audio settings, Channel Scan

Audio Only

Turn off the LCD backlight and allow the current input’s audio to remain “on” for listening.

1.When access AV sub-menu, press arrow keys to select Audio Only.

2.Press arrow keys and Enter button on the remote to select ON or OFF.

Reset Picture and Audio settings

1.When access AV sub-menu, press arrow keys to select Reset.

2.Press arrow keys and Enter button on the remote to reset the settings.

English

Channel Management

Channel Scan

Once “Channel Scan” is not completed at the stage of “Initial Setup” (see page 22), please ensure to follow the below procedures to reach a completion.

1.When access TV sub-menu, press arrow keys and Enter button on the remote control to select Scan Channels.

2.Press arrow keys and Enter button on the remote control to select Antenna or Cable scan and start to scan channels.

3.Once scan process is completed, all scanned channels will be stored automatically in the system then TV displays the last channel now be found.

4.Press Enter button on the remote control to finish.

Once a PIN was set before, the system will require a PIN No. to be entered before perform “Channel Scans” function. Please enter “0000” as the default PIN setting.

33