Cleaning the interior components
l
l
Electrical Shock and
Product Damage Hazard
Do not operate ice maker with lower access panel or control panel removed. Eleotrfcal shock or personal injury could result.
Do not wash plastic parts in dish- washer. They cannot withstand temperatures above 145°F (63°C).
Failure to follow the above precautions could result in electrical shock or product damage.
1.Disconnect the electrical power supply to the machine, and turn the Cycle Control Knob to “OFF.” Open the storage bin door and remove any ice that is in the bin.
2.Remove ice retainer baffle by flexing it and then slide it off the studs.
3.Remove the ice cutter grid by unscrewing the two thumb screws, sliding the grid fonnrard, and unplugging the electrical wire harness.
4.Remove the water pan by unscrewing and removing the two thumb screws and washers.
5. Remove the hose from the water pump.
