Style 2 Series Electronic Oven Control (see “Electronic Oven Controls” section)
To Set a Timed Cook:
1.Press BAKE. The bake indicator light will light up.
2.Set the temperature (optional).
3.Press the TEMP/TIME “up” or “down” arrow pad to enter a temperature other than the one displayed.
4.Press COOK TIME. The cook time oven indicator light will light up.
5.Press TEMP/TIME “up” or “down” arrow pad to enter the length of time to cook.
6.Press START/ENTER. The display will count down the time. When the time ends, the oven will shut off automatically and “End” will appear on the display.
7.Press CANCEL or OFF/CANCEL or open the oven door to clear the display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of day. See “Clock” section.
1.Press BAKE.
2.Set the temperature (optional).
3.Press the TEMP/TIME “up” or “down” arrow pad to enter a temperature other than the one displayed.
4.Press COOK TIME. The cook time oven indicator light will light up.
5.Press the TEMP/TIME “up” or “down” arrow pad to enter the length of time to cook.
6.Press START TIME. The start time/delay oven indicator light will light up.
7.Press the TEMP/TIME “up” or “down” arrow pad to enter the time of day to start.
8.Press START/ENTER.
When the start time is reached, the oven will automatically turn on. The temperature and/or time settings can be changed any time after pressing START/ENTER by repeating steps
9.Press CANCEL or OFF/CANCEL or open the oven door to clear the display.
Sequence Programming
(on some models)
Sequence Programming allows you to program at one time up to 4 cook functions, and is usable with other electronic oven control functions, such as the Timer and Warming Drawer.
Sequence Programming takes precedence over any nonsequenced cook function. For example, if an untimed Bake function is in process and a sequence program is started, the untimed Bake function will be canceled, and the program sequence will start.
All steps of a sequenced program must be programmed with a stop time. If a stop time is not entered for a step in the sequence program, and the FIRST/NEXT STEP pad is pressed, 3 tones will sound.
To Program the First Step of the Sequence:
1.Press FIRST/NEXT STEP.
“PROGRAM” and “STEP” will appear on the display. A flashing “1” will also appear on the display, indicating that Step 1 is being programmed.
2.Choose the desired cook function by pressing any cook function key.
3.Press START TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to begin.
If START TIME is not pressed, then the sequence of cook functions will begin immediately once programming is complete and START is pressed.
The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. “Stop” and “Time” will also appear on the display.
4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to stop.
To Program Next Steps of the Sequence:
1.Press FIRST/NEXT STEP.
“PROGRAM” and “STEP” will appear on the display. The number of the steps being programmed will flash.
“START” and “TIME will appear on the display.
2.Choose the desired cook function by pressing any cook function key.
Press TEMP “up” or “down” arrow pad (if desired) to select temperature.
3.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to select stop time.
4.Press START to begin sequence.
5.Press CANCEL or OFF/CANCEL at any time to clear program and to stop program.
14
