The anti-tip bracket
The range will not tip during normal use. However, tipping can occur if you apply too much force or weight to the open door without the
Tip Over Hazard
Connect anti-tip bracket to the range feet.
Reconnect anti-tip bracket, if the range is moved.
Do not push down on the open oven door.
Follow the installation instructions.
Do not let children climb onto the oven door.
Failure to do so can result in death, burns, or other injury.
To verify the
is engaged (if you have a floor brat ket):
l Remove the storage drawer. (See page 19.) l Look to see if the
attached to floor with screws.
l Make sure one rear leveling leg is positioned under the
l See Installation Instructions for further details.
To verify the
l Look to see if the
lMake sure the cable on the back of the range is secured by the two hooks on the bracket.
l Cable must be unhooked from wall bracket to move range for cleaning or service. Re- connect cable before using range.
l See Installation Instructions for further details.
Rear leveling leg
Floor bracket
Cable
(attached to rear of control panel)
Wall bracket
Optional door panel pat
If you | would like | to change the color | of your | l |
oven | door glass | to white or almond, | you can | l |
order one of these kits from your Roper Dealer. The kits include easy installation instructions.
White (Kit No. 814071) Almond (Kit No. 814072)
20
