If You Need Assistance or Service
This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
1. Before calling for assistance .. .
Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM POSSIBLE CAUSE
Jothing operates The power supply cord is not plugged into a live circuit with the proper voltage.
A household fuse has blown or a circuit breaker has tripped.
The oven will not The Oven Selector is not
aperateturned to BAKE or BROIL.
A delayed start time has been set.
The Oven Temperature Control Knob is not turned to a temperature setting.
The MEALTIMER” clock is not set correctly.
The Stop or Start Time Knobs for the MEAL- TIMER clock are not set at the correct time of day.
Surface units will A household fuse has
not operate blown or a circuit breaker has tripped.
The control knob(s) will not turn.
SOLUTION
Plug power supply cord into a live circuit with proper voltage. (See Installation Instructions.)
Replace household fuse or reset circuit breaker.
Turn the Oven Selector to the desired setting.
Wait for the start time to be reached or cancel and reset the controls.
Turn the Oven Temperature Control Knob to the desired setting.
Set the MEALTIMER clock correctly. (See “Using the MEALTIMER’” clock” on page 17.)
If a delay start or stop is not desired, the Stop and Start Time Knobs must be turned to the correct time of day. Turn knobs till they pop out.
Replace household fuse or reset circuit breaker.
Turn knob(s) again, pushing in as you turn.
continued on next page
29
