b-UP COOKCOPANDSURFACEBURNERS
1.Remove the surface burner grates.
2.Lift the front of cooktop at both front corners
71;;E~yf;z;r3.
cooktop. Damagecould result to the porcelain and the cooktop frame.
3. Wipe the surface under the cooktop with warm,
71;;~Fzz&2zPg
pad on heavily soiled areas.
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack, or convulsions.
5.Check the burner flames once in a while for proper size and shape as shown.
A good flame is blue in
Portscolor. If flames lift away from ports, are yellow, or are noisy, turn off the burner. Allow the burner to cool and follow Step 6.
-If you still have a problem, contact an authorized Roper service technician to check the air/gas
mixture or see the Installation Instructions.
6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.
DO NOT use a tooth- pick to clean the ports. Toothpick pieces may clog the ports.
4. Wipe off the surface burners with warm, soapy
food, soak the burners in a vinegar and water solution for
22