TROUBIISHOOIINC
Most cooking problems often are caused by little things you can find and fix without tools of any kind. Check the lists below and on the next page before calling for assistance or service. If you still need help, see “Requesting Assistance or Service” on page 27.
RANGE~0~sNOTWORK
PROBLEM
Nothing works
CAUSE
0 The range is not properly connected to the gas supply. Contact an autho- rized Roper service technician to reconnect the range to the gas supply. (See the Installation Instructions.)
0 You have blown a household fuse or tripped a circuit breaker.
0 The control knob is not set correctly. Push in the control knobs before turning them.
(~EN/BR~ILERBURNER
PROBLEM
The oven does not work
The burner fails to light
The burner flames lift away from the ports, are yellow, or are noisy
CAUSE
0 You have not set the oven control knob correctly. Refer to the proper instructions.
l The main or regulator gas shutoff valve is in the off position. (See the Installation Instructions.)
0 The ignitor is broken. Contact an authorized Roper service technician to replace it.
0 You have blown a household fuse or tripped a circuit breaker.
0 The air/gas mixture is incorrect. Contact an authorized Roper service technician to check the air/gas mixture or see the Installation Instructions.
SURFACEBURNERS
PROBLEM
The burner fails to light
The burner flames are uneven
The burner flames lift off the ports, are yellow, or are noisy when turned off
The burner makes a popping noise when on
CAUSE
l You have blown a household fuse or tripped a circuit breaker.
l The burner ports may be clogged. Clean them with a straight pin. (See pages 21 and 22.)
l The burner ports may be clogged. Clean them with a straight pin. (See pages 21 and 22.)
0 The burner needs cleaning. (See pages 21 and 22.)
0 The air/gas mixture is incorrect. Contact an authorized Roper service technician to check the air/gas mixture or see the Installation Instructions.
0 The burner is wet from washing. Let it dry.
