Whirlpool FGS385B important safety instructions Lift-upcooktop, Surface burners

Lift-up cooktop

1.Remove surface burner grates.

2.Lift front of cooktop at both front corners until the support rods lock into place.

Personal Injury Hazard

Be sure both support rods are fully extended and in the locked position.

Failure to do so could result in personal injury from the cooktop accidentally falling.

NOTE: Do not drop the cooktop. Damage could result to the porcelain and the cooktop frame.

3.Wipe with warm, soapy water. Use a soapy, steel-wool pad on heavily soiled areas.

4.To lower the cooktop, lift cooktop from both sides while pressing the support rods back to unlock them. Lower the cooktop into place. Replace surface burner grates.

Surface burners

1.Lift up the cooktop, following the instruc- tions above.

2. Before	cleaning,	remove screws that	Screws
hold each of the burners in place. The
screws prevent the burners from moving
during shipment. Remove the shipping
screws with a Phillips screwdriver and lift
the burners up and out. This separates
the burners from the mounting bracket
under	each burner	pair.

3.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solution for 20-30 minutes. Scrub with a plastic scrubbing pad.

4.If ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports.

24