OVEN CONTROL
The oven’s controls are accessed through its control panel and interactive touch display.
NOTE: Due to the sensitivity of the control panel, we have provided special instructions for cleaning the panel as well as the touch screen display. See “General Cleaning” section for cleaning instructions.
A
MAIN MENU:
Cook Method
Food Type
Time / Power | Most Used |
Kids Menu | Settings & Info |
B 
A. Control panel
B. Interactive touch display
Control Panel
The control panel houses basic controls and Quick Touch controls. The control pads are very sensitive, and require only a light touch to activate.
For more information about the individual controls, see their respective sections in this manual.
Interactive Touch Display
The display area functions as both a display and an interactive,
Display
When power is first supplied to the oven, the welcome screen appears, asking whether you would like to set the clock. Touch “Yes” and set the clock (see “Clock” section), or touch “No” and the time will default to 12:00 p.m. If the welcome screen appears at any other time, a power failure has occurred. Reset the clock if needed.
When the oven is not in use (in standby mode), the display shows the Main Menu and the date and time of day, if they are set to be displayed. See “Clock” and “Date” sections. After 2 minutes of inactivity, the display will go into sleep mode. See “Display Backlight” section.
During programming, the display shows menus, servings and weights, cooking time/power/temperature settings, preheating instructions, and/or cookware and preparation instructions.
If an attempt is made to start the oven more than 5 minutes after the food has been placed inside, a screen will appear, and 4 tones will sound, indicating that the door needs to be opened and closed again before the oven will accept the start command.
During a cooking cycle, the display shows progress bar (sensor functions only, see “Progress Bar” section), cooking animation (see “Cooking Animation” section), and the countdown of cook time remaining. The display will also give prompts to tend to the food during certain automatic cycles.
Touch Screen
The LCD touch screen is used to make menu selections, adjust settings and input commands.
A
B
C
A. Title/description region
B. Menu and selection/settings input region
C. Command input region
Menu selections and input adjustments are made in the center portion of the screen, and the command inputs (start, continue, back, cancel, etc.) are made in the bottom portion of the screen. Screen titles and descriptions are displayed in the top portion of the screen, which accepts no input. A light- to
9
