Clock
On some models, if you do not want the clock time to be displayed, press and hold the CLOCK pad (button) for 5 seconds. When the clock is not displayed, you can see the time for 5 seconds by pressing the CLOCK pad (button).
To Set:
Before setting, make sure the oven, TIMER and COOK TIME are off.
1.Press CLOCK.
2.Press the HR or MIN “up” or “down” arrow pads (buttons) to set the time of day.
3.Press CLOCK or START.
Tones
Tones are audible signals that indicate whether a function has been entered correctly, or when a cycle has ended.
To shut off all tones except the
1.Press and hold the STOP TIME button for 5 seconds.
2.A short tone will sound when the tones have been changed. To turn tones back on, repeat step 1.
3.“OFF” will be displayed for 3 seconds when the tones have been turned off, and “ON” will be displayed for 3 seconds when the tones have been turned back on.
To choose between high and low volume tones:
1.Press and hold the DELAY button for 5 seconds.
2.A short tone will sound indicating the tones have been changed.
3.Either “HI” or “Lo” will appear on the display for 3 seconds to show the volume you have chosen.
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to Celsius.
To Change: Press and hold BROIL for 5 seconds. A tone will sound and “°C” will appear on the lower oven display for 3 seconds. Repeat to change back to Fahrenheit.
When in Fahrenheit, “°F” follows the oven temperature.
When in Celsius, “°C” follows the oven temperature.
Timer
The Timer can be set in hours or minutes up to 12 hours and 59 minutes, and counts down the set time.
NOTE: The Timer does not start or stop the oven.
To Set:
1.Press TIMER SET.
If no action is taken after one minute, the display will return to the time of day mode.
2.Press the HR or MIN “up” or “down” arrow pads (buttons) to set the length of time.
3.Press START.
If not pressed within 5 seconds, the display will return to the time of day mode and the programmed function will be canceled.
When the set time ends,
4.Press TIMER OFF anytime to cancel the Timer.
Remember, do not press the OFF pad (button) because the oven will turn off.
To display the time of day when the timer is counting down, press
CLOCK.
Control Lock
The Control Lock shuts down the control panel pads (buttons) to prevent unintended use of the oven(s).
When the control is locked, only the CLOCK, TIMER SET and TIMER OFF pads (buttons) will function.
The Control Lock is preset unlocked, but can be locked.
To Lock/Unlock Control: Before locking, make sure the oven, Timer and Timed Cooking (COOK TIME on some models) are off. Press and hold START for 5 seconds, or until a single tone sounds, “LOC” and a picture of a lock appear on the display. Repeat to unlock and remove “LOC” from display.
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door and element or burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted. It can be changed in Fahrenheit
or Celsius.
A minus sign means the oven will be cooler by the displayed amount. No sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.
ADJUSTMENT °F | COOKS FOOD |
(ADJUSTMENT °C) |
|
|
|
5° to 10°F (3° to 6°C) | ...a little more |
|
|
15° to 20°F (9° to 12°C) | ...moderately more |
|
|
25° to 35°F (15° to 21°C) | ...much more |
|
|
...a little less | |
|
|
...moderately less | |
|
|
...much less | |
|
|
To Adjust Oven Temperature Calibration:
1.Press and hold BAKE for 5 seconds until the oven display shows the current calibration, for example “0° CAL.”
2.Press the TEMP “up” or “down” arrow pads (buttons) to increase or to decrease the temperature in 10°F (6°C) amounts. The adjustment can be set between 30°F (18°C) and
3.Press START.
To Display Temperatures in °C instead of °F:
Press and hold the BROIL button for 5 seconds. A short tone will sound, and the temperature display will switch to °C. Repeat to switch back to °F.
10
