Whirlpool KR-28 manual Direct Spark Ignition Control, Direct Spark Ignition Electronic Control

DIRECT SPARK IGNITION CONTROL

The Direct Spark Ignition (DSI) Control inter- faces with the Electronic Oven Control for the Bake, Broil, and Self-Clean functions. The DSI also interfaces with the four cooktop burner ig- nition switches, to provide ignition for the cooktop.

DIRECT SPARK	J1
IGNITION CONTROL	10 9 7 6 4 3 2 1

10-PIN CONNECTOR

The DSI control uses a self-diagnostic test to verify that the oven ignition system is working properly. It will also continually monitor the flame presence within the oven. The DSI con- trol operates on 102 to 132 VAC. All input and output testing is performed at the J1 connec- tor (see below).

TOP BURNERS GND BAKE BROIL

J1

DIRECT SPARK IGNITION ELECTRONIC CONTROL

Bake Valve Output 1

Valve Common 2

Broil Valve Output 3

Neutral 4

Bake Input 6

Broil Input 7

Top Burner Input 9

L1 10

	T4
J7
Right Front Spark Output	J8	T3	J1
	J5
Left Front Spark Output
Right Rear Spark Output		J6
Left Rear Spark Output			T2
			J2
	Chassis Ground		J4
			T1
Bake Burner Spark Output			J3

Broil Burner Spark Output

- 7 -