Cooktop Function
1.Set the voltmeter to read 120 VAC.
J1 Connector
2.Turn one of the cooktop burner valves to the LITE position.
Cooktop Strip Circuit
3.Touch the test leads to the J1 connector at terminals 4 (white) and 10 (black). The AC voltmeter should indicate 120 VAC. If not, check for the proper voltage at the power supply outlet, and check the main wiring harness.
4 (white) | 10 (black) | ||
|
| ||
|
|
|
|
|
|
|
|
J1 Connector
4.Touch the test leads to the J1 connector at terminals 4 (white) and 9 (red). The AC voltmeter should indicate 120 VAC. If not, check the ignition switch and the main wiring harness.
4 (white) | 9 (red) | ||
|
| ||
|
|
|
|
|
|
|
|
J1 Connector
L1
BK
BK
IGNITION
SWITCH | N |
R
W
DIRECT SPARK | J1 10 9 | 7 6 4 3 2 1 |
IGNITION CONTROL | ||
| ||
TOP BURNERS | GND | |
- 16 -
