![TECH TIPS](/images/new-backgrounds/72673/7267353x1.webp)
SECTION 5
TECH TIPS
DIAGNOSTIC FLOW CHARTS
COOKTOP
Start | NOTE: The range must be plugged in for | |
at least 40 seconds before this test can begin. | ||
|
Does cooktop
yes Done
spark properly?
no
Check the high voltage igniter wires for continuity and proper connections from DSI control to igniters. Make sure the burner caps are the correct size and are properly oriented. Also, if the supply voltage is
less than 102 VAC, the spark might not occur.
Diagnose the main wiring |
|
|
| Is 120 VAC |
harness. 120 VAC should |
| no |
| present from |
|
| |||
always be present at this point. |
|
|
| to |
yes
Diagnose the cooktop wiring
harness. Check the cooktop no switches for the proper function.
With the cooktop knob in LITE, is 120 VAC present from
yes
Replace the DSI control.
- 23 -