Using Your Microwave Oven
Continued
Audible signals
Audible signals are available to guide you when setting and using your oven. A programming lone will sound each time you touch a pad. Two beeps will sound between cycles. Three beeps signal the end of the Minute Timer function and a cook or defrost cycle. If you don’t hear a tone, it is because of incorrectly entered instructions. For example, a tone will not sound if you touch a Number Pad before you touch a Command Pad.
Setting the clock
When the oven is first plugged in, the Display shows “:O”. If the electric power ever goes off, the Display will again show “:O” when the power comes back on.
You can cook without setting the clock.
1. To set the clock, touch CLOCK SET and the Display will show a “0”.
2. Touch Number Pads for the correct time of day. The Display will show what numbers you touched in the order you touched them. This example shows 325.
3. Touch CLOCK SET. The Clock is set. If you have touched in an incorrect time, such as 12:65, “E” will show on the Display and two beeps will sound. Touch CANCEL and then CLOCK SET and start over.
NOTE: To reset the clock, touch CLOCK SET.
The current time will show on the Display and the colon will go off. Continue to set the clock as shown above.
10
