Whirlpool MT9100SF Getting To Know Your Microwave Oven, Audible signals, Interrupting cooking

Models: YMT9090SF YMT9101SF MT9101SF MT9100SF

1 96
Download 96 pages 28.83 Kb
Page 16
Image 16
Audible signals

GETTING TO KNOW YOUR MICROWAVE OVEN

10.COOK TIME. Touch this pad followed by Number pads to enter cooking times. See pages 20, 22, and 24 for more information.

11.COOK POWER. Touch this pad, after the cook time has been set, followed by a Number pad to set the amount of microwave energy released to cook the food. The higher the number, the higher the power or faster the “cooking speed.” See page 21 for more information.

12.CLOCK SET. Touch this pad followed by Number pads to enter the correct time of day. See page 17 for more information.

13.Number Pads. Touch Number pads to enter cooking times, cook powers, weights, and quantities.

14.START/ENTER. Touch this pad to start a function that you have set.

15.ADD MINUTE. Touch this pad to cook for one minute at 100% cook power or to add an extra minute to your cooking cycle. See page 19 for more information.

16.OFF/CANCEL. Touch this pad to erase an incorrect command, to cancel a program during cooking, or to clear the display after a function is completed. This pad will not erase time of day.

NOTES:

If you choose an automatic cooking function and change your mind, you must press OFF/CANCEL before you choose another automatic cooking function.

If you attempt to enter unacceptable instructions, three tones will sound, and “Err” will appear on the display. Touch OFF/CANCEL and re-enter the instructions.

Once you choose a function, an indica- tor light () will flash as a prompt for the next action you need to perform.

If you choose a function but do not press another command pad within one minute, the display returns to the time of day and you have to start over.

If you have entered all settings for a function but do not touch the Start/Enter pad in 5 seconds, the Start? indicator light will flash.

If you open the door while the oven is on and then shut the door, the Start? indicator light will flash.

Audible signals

Audible signals are available to guide you when setting and using your oven:

A programming tone will sound each time you touch a pad.

Five tones signal the end of a cooking cycle and two tones will sound every minute until you open the door or press the Off/Cancel pad.

Three tones will sound if you enter incorrect instructions.

Interrupting cooking

You can stop the oven during a cycle by opening the door. The oven stops heating and the fan stops, but the light stays on. To restart cooking, close the door and

TOUCH

If you do not want to continue cooking:

Close the door and the light goes off.

OR

TOUCH

NOTE: Before setting a function, touch OFF/CANCEL to make sure no other function is on.

16

Page 16
Image 16
Whirlpool MT9100SF, YMT9101SF, YMT9090SF Getting To Know Your Microwave Oven, Audible signals, Interrupting cooking