Audible signals
Audible signals tell you if a function is entered correctly or not. They also tell you when a cycle is completed.
To shut off all signals except for error tones and the hidden function signal:
Press and hold the Stop Time pad for
5 seconds. A short tone will sound to tell you the signals have been
STOP changed. “Snd”and “On”or “Snd”
TIME
and “Off”will appear on the
0 display.
Repeat the above step to turn the signals back on.
To choose between high and low volume signals:
Press and hold the Delay Start Time pad for 5 seconds. A short tone will sound
DELAY to tell you the signals have been
S;i;T changed. Either “HI”and “Snd” or “LO”and “Snd”will appear on the
0 time display to show the volume
you chose. If the volume is changed while the audible signals are off, when signals are turned back on they will be at the volume setting chosen.
Baking/roasting
NOTE: Displays shown are from single/ upper ovens. Command pads shown are from double ovens. In some cases, lower
1. Position racks.
For more information, see “Positioning racks and pans” on page 7.
2.Choose baking/roasting setting.
3.Set temperature (optional).
Do this step if you want to set a tempera- ture other than 350°F. Press A to raise the temperature or V to lower the temp- erature in 5°F amounts. Use these pads until the desired temperature shows on the small display. (If the Temp pads are held down the temperature will change faster.)
4.When roasting or cooking casseroles, put food in oven.
oven displays and single oven command pads may look different than those shown.
PRESS YOU SEE
(example for Bake at 37S’F)
You do not have to preheat the oven when roasting or cooking casseroles.
