3.IMPORTANT: Dry the element completely after cleaning. Turn on the element for a few minutes to dry thoroughly. After the element has cooled, use a paper towel to apply a thin coat of salt-free oil to the surf= units to season and restore the finish. Wipe excess oil off stainless steel trim rings. Then heat 3-5 minutes. Some smoking may occur; this is normal. ff surface units have dark spots caused by grease and food, the oil treatment will improve their appearance, but not elimi- nate the spots.

Optional: ElectroP dressing can be applied to the surface units to improve their appearance.

To order information for ElectroR Dressing (Part No. 814030) write to:

Whirlpool Corporation

Attention: Customer Service Department 1900 Whirlpool Drive

LaPone, IN 46350 OR

Call 1-800-253-1301 to order. You must have a major credit card to order by phone.

.-

Q1. .Q

U

1

JII

32

Page 32
Image 32
Whirlpool RF377PXY important safety instructions Q1. .Q