7.Push the Stop Time pad. The time of day with the colon flashing will show in the display, the Stop Time Indicator Light will light up, and the Start Time Indicator LigM will flash.
8.Use the Hour and Minute pads to set the desired stop time. Push the “up’(A) or =down’ (V) pad(s) until the correct time shows in the display.
This example shows a desired stop time of 230. This provides a cook time of 30 minutes (the difference between the start and stop times).
NOTE: If you do not set a stop time within
5 minutes, the display will return to the time of day.
9.Push the StartEnter pad. The Delay Indicator Liiht will light up in the display to indicate that the oven is programmed to start at a later time. The Start Time and Stop Time Indicator Lights will flash.
NOTE: You can change a time setting after pushing the Start/Enter pad without pushing the Start/Enter pad again.
10.When the start time is reached, the Delay Indicator Light will go off, a single tone will sound and the display will count down the baking/roasting time in minutes. The example at right shows a baking/roasting time of 30 minutes (the difference between the stop and start times).
11.When the baking/roasting time is completed, the oven will turn off automaticalty, beep four times, and “End”will show in the display. You will also hear two tones once every minute until you push the Off/Cancel pad.
NOTE: To disable the reminder tones, push and hold the Timer Set pad for 4 seconds. To reactivate the tones, repeat this procedure.
22
