PROBLEM

Cooklng results are not what you expected

The display ls flashlng ‘88:88”

‘F2” shows ln the display

POSSlBLE CAUSE

The range is not level.

The oven temperature is too low or too high.

The oven was not preheated before baking.

The recipe has never been tested or is not from a reliable source.

The pan used is not the type or size recommended in the recipe.

There is not proper air circulation around pan when baking.

Cooking utensil does not fit the surface unit being used.

There has been a power failure.

soLUllON

Level range. (See Installation Instruc- tions.)

See page 14 for instructions on how to adjust the Oven Temperature Control.

Preheat oven when called for in recipe.

Use only tested recipes from a reliable source.

Refer to a reliable cookbook for recom- mended pan type and size.

Allow 1M to 2 inches (4-5 cm) of air space on all sides of pan.

Pan should be the same size or slightly larger than surface unit being used.

Reset the clock (See page 11.)

Call for service. (See Step 3 on page 37.)

36

Page 36
Image 36
Whirlpool RF377PXY important safety instructions Reset the clock See Call for service. See on