7.Push the Delay Start Time pad. The time of day with the arbn flashing will show in the display, the Start Trne Indicator Light will light up, and the Cook Time Indicator Liiht will flash.
8.Use the Hour and Minute pads to set the desired start time. Push the “up’(A) or ‘down’ (r) pad(s) until the correct start time shows in the display.
This example shows a desired start time of
2 o’clock. The oven will automatically shut off at 230 (the set start time plus the set Cdok time).
9.Push the Start/Enter pad. The Delay Indicator Liiht will light up in the display to indicate that the oven is programmed to start at a later time. The Cook Time and Start Time Indicator Lights will flash.
NOTE: You can change a time setting after pushing the Start/Enter pad without pushing the Start/Enter pad again.
10.When the start time is reached, the Delay Indicator Light will go off, a single tone will sound and the display will count down the baking/masting time in minutes.
11.When the baking/roasting time is completed, the oven will turn off automaticaffy, beep four times, and ‘End’ will show in the display. You will also hear two tones once every minute until you push the Off/Cancel pad.
NOTE: To disable the reminder tones, push and hold the Timer Set pad for 4 seconds. To reactivate the tones, repeat this procedure.
TtME TME
TIME TIME
. -
.
Ill
DELAY
20
