7.Push the Stop Time pad. The time of day with the colon flashing will show in the display, the Stop Time indicator LigM will lght up, and the Cook Time Indicator Light will flash.
8.Use the Hour and Minute pads to set the desired stop time. Push the “up’(A) or ‘down’ (V) pad(s) until the correct time shows in the display.
This example shows a desired stop time of 230. The oven will automatically start cooking at 2330 (the set stop time minus the set cook time).
NOTE: ff you do not set a stop time within
5 minutes, the display will return to the time of day.
9.Push the Start/Enter pad. The Delay Indicator Light will light up in the display to indicate that the oven is programmed to start at a later time. The Cook Time and Stop Time Indicator Lights will flash.
NOTE: You can change a time setting after pushing the Start/Enter pad without pushing the Statinter pad again.
10.When the start time is reached, the Delay Indicator Lght will go off, a single tone will sound and the display will count down the baking/roasting time in minutes.
24
