Cleaning and caring for your range
CONTROL PANEL AND KNOBS
1.First make sure knobs are set on OFF then pull knob rtralght off.
2.Use warm soapy water and a soft cloth to wipe the panel. Rinse and wipe dry.
SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.Be sure surface units are OFF and COOL.
\‘;\
I -
\
*es
\
2.Lift the edge of the unit opposite the recep tacle just enough to clearthe reflector bowl.
3.Pull the surface unit straight away from the receptacle.
4. Lift out the reflector bowl.
3.Wash knobs in warm soapy water. Rinse
well and dry. | REPLACING |
1. Be sure surface unit controls are OFF.
Bowl
1 Opening
4.Push the knobs straight back on. Make sure they point to OFF.
18
2
I
h Receptacle
2.Line up opening in the reflector bowl with the surface unit receptacle.