USING YOUR RANGE
BAKING/ROASTING
Your oven is designed with the AccuBake tempera- ture management system to constantly monitor oven temperature. The burner element will cycle, as needed, to maintain the desired temperature. This feature is automatically activated when the oven is in operation.
IMPORTANT: Do not try to light the oven burner during a power failure.
1.Place the racks where you need them in the oven. For more information, see “Positioning racks
Front | and pans” earlier in this | |
section. | ||
|
Rear
2. Choose the bake setting. | PRESS | YOU SEE |
| BAKE |
|
|
| BAKE |
3.Set the temperature (optional).
Do this step if you want to set a temperature other than 350°F. Press the ▲ temp pad to raise the temperature or the ▼ temp pad to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
PRESS | YOU SEE |
TEMP
BAKE
(example for bake at 375°F)
4.When roasting, put your food in the oven. You do not have to preheat the oven when roasting, unless your
recipe recommends it.
Roasting meats and poultry
•For even cooking, place the meat on a rack in a shallow pan. This keeps the meat out of the drippings and allows the heat to circulate better.
•Use a meat thermometer for the most accurate doneness. Insert it so the tip is in the center of the largest muscle or thickest portion of the meat or poultry. Make sure the thermometer is not touching bone, fat, or the bottom of the pan.
14
