Other possible problems and their causes: PROBLEM CAUSE
The oven will not
operate
l
You have not set the electronic control correctly. Refer to
the section in this manual describing
the function you are
operating.
Burner fails to light
l
You have programmed a delayed start time. Wait for the
start time to be reached or cancel and reset
the control.
l
The range is not plugged into a live outlet with the proper
voltage. (See Installation Instructions.)
l
You have blown a household fuse or tripped a circuit
breaker. In case of prolonged power failure, manually
light
burners (see page 9).
l
The burner ports are clogged. Clean with a straight pin or a
brush (see page 34).
Burner flames are
l
The burner ports are clogged. Clean with a straight pin or a
uneven brush (see page 34). If this fails, call for service.
Burner flames lift off
l
The air/gas mixture is incorrect. Contact a
service techni-
ports, are yellow, or are cian to check it.
noisy when turned off
Burner makes popplng
l
The burner is wet from
washing. Let dry.
noise when on
continued on next page
39