CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
To remove:
1.Open the door about halfway. Insert door removal pins into both hinge hangers. Do not remove them while the door is removed
from the range.
3.Rotate the door toward the range. Lift up the door 
until it stops. Do not use
the door handle to lift the door. Rotate the door toward the floor and pull it toward you.
2.Close the door as far as the door removal pins will let you.
To replace:
NOTE: The door removal pins you inserted must still be in both sides of the door.
1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
2.Rest the hinge hanger so that it is flat (at the bottom of the hinge hanger on the bottom of the front frame slot).
3.Position the door with the hinge hanger slots almost parallel to the front frame.
4.Push up and in until the hinge hanger slots become fastened to the range. Lower the door and rotate it slightly from the front to the back until the slots are fully fastened. The hinge hanger will be close to the bottom of the front frame slot.
5.Pull door open about halfway and remove the door removal pins. Save door removal pins for future use.
6.Close the door.
Remove door removal pin
Oven door | Range |
|
Hinge hanger
Up
Hinge hanger flat
In
Front frame slot bottom
35
