Vanguard Heating VDVF36PP, VDVF36STP Installation, Continued, Vanguard Rigid Venting Cont

OWNER’S MANUAL

VENTING		Vanguard Rigid Venting (Cont.)
INSTALLATION		Number	Description
		*SVK	Snorkel Rigid Vent Kit
Continued			Includes: 7" x 30° Elbow, 7" x 4'
HIGH ALTITUDE			Galvanized Pipe, 7" x 90° El-
			bow, 7" Adjustable Galvanized
INSTALLATION			Pipe (7-12"), Wall Thimble, 36"
Your Vanguard direct-vent fireplace has			Snorkel Termination, RTV Sili-
			cone and 28 Screws
been AGA tested and approved for eleva-
		*RVF	Roof Rigid Vent Kit
tions from 0-2000 feet and CGA certified
			Includes: Flue Restrictor, Storm
for elevations from 0-4500 feet.
			Collar, 7" x 30° Elbow, 7" x 4'
When installing this fireplace at an elevation
			Galvanized Pipe, 7" x 2' Galva-
above 2000 feet (in the USA), you may need
			nized Pipe, 7" Adjustable Gal-
to decrease the input rating by changing the
			vanized Pipe (7-12"), Firestop
existing burner orifice to a smaller size. Re-
			Support, Roof Flashing, RTV
duce input 4% for each 1000 feet above sea
			Silicone, Vertical Termination,
level. Check with your local gas company for
			and 26 screws
proper orifice size identification.
		D1000	7" x 12" Galvanized Coaxial
When installing this fireplace at an eleva-
			Pipe (6 pcs.)
tion above 4500 feet (in Canada), check		D1010	7" x 24" Galvanized Coaxial
with local authorities.			Pipe (6 pcs.)
Consult your local gas company to help de-		D1020	7" x 48" Galvanized Coaxial
termine the proper orifice for your location.			Pipe (6 pcs.)
For assistance with any high altitude instal-		D1030	7" Adjustable (7-12")
			Galvanized Coaxial Pipe
lation contact DESA International’s Tech-
nical Service Department at 1-800-DESA-			(6 pcs.)
LOG (1-800-337-2564).		D1050	7" x 6" Galvanized Coaxial
PARTS LISTS FOR VENTING			Pipe (6 pcs.)
		D2000	7" x 90° Elbow (6 pcs.)
KITS AND COMPONENTS
		D2010	7" x 45° Elbow (6 pcs.)
*NOTICE: The 7" x 30° Elbow sup-		D2060	7" x 45° Starter Elbow
plied with kits CVK, BVK, SVK,		D3000	Wall Strap/Offset Support
and RVF cannot be used. It MUST			(6 pcs.)
be replaced with a 7" x 45º Starter		D3010	Storm Collar (6 pcs.)
Elbow (D2060).
		D3020	Wall Thimble (6 pcs.)
Vanguard Rigid Venting		D3050	Vertical Restrictor (6 pcs.)
Number	Description	D3060	Ceiling Firestop/Support
			(6 pcs.)
*CVK	Corner Vent Kit
	Includes: 7" x 30º Elbow, 7" x 90ºD3070		Rectangular Horizontal Rigid
	Elbow, 7" Adjustable Galvanized		Vent Termination Cap
		D3090	Cathedral Ceiling Support
	Pipe (7-12"), 6" Pipe, Wall
	Thimble, Horizontal Termina-		Box
	tion, RTV Silicone and 20 Screws	D4000	Roof Flashing 6/12-9/12
*BVK	Basement Rigid Vent Kit	D4010	Roof Flashing 9/12-12/12
	Includes: 7" x 30° Elbow, 7" x 4'	D4020	Flex Connector (6 pcs.)
	Galvanized Pipe, 7" x 90° El-	D4030	Flex Wall Thimble (6 pcs.)
	bow, 7" Adjustable Galvanized
		D4040	4" Hose Clamp (6 pcs.)
	Pipe (7-12"), Wall Thimble,
		D4050	7" Hose Clamp (6 pcs.)
	Horizontal Termination, RTV
	Silicone and 20 Screws	D5000	Vinyl Siding Standoff (6 pcs.)

Vanguard Flexible Venting

Number Description

FGFVK Flex Ground Floor Vent Kit Includes: Flex Adapter, 7" x 4' Flexible Pipe, 4" x 4' Flexible Pipe, Wall Thimble, Horizontal Termination, (4) Spacer Springs,

(2)4" Hose Clamps, (2) 7" Hose Clamps, RTV Silicone, and 10 Screws

D1040 7" x 25' Coaxial Flex Pipe

with Spacer Springs

D3080 Rectangular Horizontal

Flex Termination Cap

SIMPSON DURA-VENT GS 4" x 6 5/8 "

Number Description

9027" x 48" Pipe

9037" x 36" Pipe

9047" x 24" Pipe

9067" x 12" Pipe

9077" x 9" Pipe

9087" x 6" Pipe

9117" Adjustable (11"-14 5/8") Pipe

940Wall Thimble

941Cathedral Ceiling Support Box

943Roof Flashing 0/12-6/12

943S Roof Flashing 7/12-12/12

9457" x 45° Elbow

950Vinyl Siding Standoff

953Storm Collar

963Ceiling Firestop

98136" Snorkel Termination

984HorizontalTerminationVentCap

988Wall Strap

9907" x 90° Elbow

991Vertical High Wind Termination

105706 15