WhisperKool 5000 owner manual Standard Controller Layout

QUICK REFERENCE GUIDE

Standard Controller Layout

*If your unit is installed through the wall and does not have a remote keypad you have the Standard Controller*

Note: The 1 or 3-5 qualifies the amount of time in seconds that the button must be pushed to activate the feature.

Refer to page 30 for complete listing of buttons and symbols.

Energy Saving

Button 1

Energy Reduction

Set Button

•View Set Point 1

•Change Set Point 3-5

Anti Frost

Compressor Evaporator and Condenser Fan

Cellar “Pre-Chill” Button 3-5

Hi Bottle Temp History & Scroll

Button 1

Push to see the max stored temperature. In programming mode use to browse the parameter codes or increase the display value. Hold for 3 seconds to start fast freezing cycle.

•SET + Down = CPSM 10-15

•Reset Hi & Lo Button 3-5

Display and modify set point. In programming mode it selects a parameter con￿rms an opera- tion. Hold for 3 seconds when the min or max temperature is displayed to RESET.

ALARM

Pre-Chill Display

Control “ON/OFF” Button

•Turns the Cooling Unit

“ON/OFF”

Low Bottle Temp History & Scroll Button 1

Push to see the min. stored temperature. In programming mode use to browse the parameter codes or decrease

the displayed value1 .

Remote Controller Layout

*If your unit has a remote keypad then you have the Remote Controller*

Note: The 1 or 3-5 qualifies the amount of time in seconds that the button must be pushed to activate the feature.

Refer to page 34 for complete listing of buttons and symbols.

Inactive

Set Button

•View Set Point 1

•Change Set Point 3-5

•SET + Down = CPSM 3 - 5

Anti Frost Compressor Evaporator and Condenser Fan

Hi Bottle Temp History & Scroll

Button 1

Cellar “Pre-Chill” Button 3-5

Push to see the max stored temperature. In programming mode use to browse the parameter codes or increase the display value. Hold for 3 seconds to start fast freezing cycle.

•Reset Hi & Lo Button 3-5

Display and modify set point. In programming mode it selects a parameter con￿rms an opera- tion. Hold for 3 seconds when the min or max temperature is displayed to RESET.

ALARM

Pre-Chill Display

Low Bottle Temp History & Scroll Button 1

Push to see the min. stored temperature. In programming mode use to browse the parameter codes or decrease

the displayed value1 .

Control “ON/OFF” Button

•Turns the Cooling Unit

“ON/OFF”

Page 6 EXti 110111